How To Clean Your Showerhead

When you clean the bathroom, you probably don’t pay much attention to the showerhead. After all, doesn’t it just spray out clean water? While you don’t need to clean this component as often as your toilet or other fixtures, there are actually some benefits to adding cleanings to your routine.

At Hi-Tech Plumbing & Leak Detect, we believe that good plumbing is an important part of having a comfortable home. Neglecting to clean this fixture can lead to low water pressure or a replacement. Here’s how to clean your showerhead for a more enjoyable year-round shower experience.

How To Clean Hard Water Off Your Showerhead

Here in Edmond, our water is considered hard, meaning it’s high in mineral content. The main culprit of a “dirty” showerhead is hard water since minerals can clog the small jets over time. Hard water isn’t dangerous, but removing mineral build-up can improve the water pressure from your shower.

Method 1: Use Your Hands

The simplest way to clean hard water off your showerhead is to use your hands. This method works best when there isn’t much build-up present. Use your fingers to rub the rubber jets on the fixture and dislodge any mineral deposits.

You can also use a toothpick or toothbrush to get inside the small jets. This method takes some patience and may not remove all of the mineral build-up. However, this method works well as a quick and temporary fix to the problem.

Method 2: Vinegar And Baking Soda

If you want to deep clean your showerhead, using baking soda and vinegar is an efficient way to remove the build-up on the fixture. This mixture will create a chemical reaction that can remove stains and residue. To clean this fixture, you’ll need to complete the following steps:

• Pour baking soda and water into a gallon-sized plastic bag.
• Slowly add vinegar to the bag since it will bubble and react to the baking soda.
• Place the showerhead into the bag and submerge it into the cleaning mixture.
• Secure the bag around the fixture using a zip tie or rubber band if your showerhead is attached to the wall.
• Allow the fixture to soak for at least four hours.
• Remove the showerhead from the bag and wipe it down.
• Turn the water on and allow it to run for three to five minutes.

You can repeat this process as often as necessary to maintain good water pressure. Regular cleanings will keep the device in good condition, providing more comfortable showers. Our efficient bathroom plumbing services can aid you during this process!

Benefits Of Cleaning Your Showerhead

Although cleaning your showerhead may seem like a hassle, it has many benefits. For example, if the build-up grows so severe inside the jets of your device, you may need to buy a new one. However, if you make sure to clean it regularly, it will last much longer and perform well on a daily basis.

Additionally, when your fixture doesn’t produce good water pressure, you have to shower for longer to get completely clean. If this fixture is free from clogs or blockages, you won’t have to run water as long, which may reduce your monthly water bill.

Schedule Edmond Showerhead Maintenance Today!

If your plumbing is giving you trouble, or you’re in need of a showerhead replacement in Edmond, reach out to Hi-Tech Plumbing & Leak Detect. We can help you with all of your household plumbing needs. Contact our team to schedule an appointment!